Filter
Top Products
<P=003>
(Continued)
Notes:
● When there are no station names stored in memory,
you cannot use this function. In this case, when the
STATION button is pressed, "NOTHING" will flash for
5 seconds, and the unit will return to the original dis-
play.
● This function can only be used when the FM band
has been selected.
● The same station name can be stored in different
preset channels. Therefore, when you are choosing
a station name from the presets, the same station
name may be encountered more than once.
● In a certain area or during certain time periods, the
station names selected using the station select func-
tion may temporarily be different from the name of
the station you are actually receiving.
To try to store a station name again, if the wrong name
was stored in memory by mistake:
When you store station names in memory using the ASPM func-
tion, the correct station names may not actually be stored if there
is lots of noise or if the RDS station signal is too weak.
In this case, try storing station names in memory using the fol-
lowing procedure.
1 Press the STATION button.
2 Within 6 seconds, turn the jog dial on the main unit or press
the PRESET ( or ) button on the remote control to check
whether the station names are correct.
3 If you find a station name that is wrong, press the STATION
button again within 6 seconds to recall the preset station,
which corresponds to the station name.
4 After the preset station has been received and the correct
station name has been displayed, press the MEMORY button.
5 Within 30 seconds, Press the ENTER button whilst the preset
channel number is flashing.
● The new station name has been stored in memory correctly.
MD-C2H(SUK) TINSE0238AWZZ
21