<P=003>
(Continued)
■ When choosing a CD for playback
Press one of the CD PLAY 1 - 3 buttons to select the CD
you want to listen to.
● Only the selected disc will be played back.
When selecting
disc 1
When selecting
disc 2
When selecting
disc 3
Notes:
● If the disc tray is open, it will be automatically closed.
● If the button is pressed, continuous playback will begin
from the first track of the disc you have selected.
To interrupt playback:
Press the button.
To resume playback for just a single disc:
Press the CD PLAY 1 - 3 button whose number matches
the frame which is currently flashing.
Caution:
● Do not carry the unit whilst CDs are in the trays or
a MiniDisc is loaded. The discs may come loose
inside the unit and they may be damaged or cause
damage to the unit. This may also cause malfunc-
tions.
● Do not place two CDs in one disc position.
● Do not push the disc tray whilst it is moving.
● Do not attempt to push the disc tray by hand.
This may cause malfunctions.
● If the power fails whilst the tray is open, wait until
the power is restored.
● If the disc tray is stopped forcibly, "TRAY ERR" will
appear in the display and the unit will not function.
If this occurs, press the ON/STAND-BY button to
enter the stand-by mode and turn it on again.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● If a disc is damaged, dirty, or loaded upside down, the disc
will be skipped and the next disc will automatically play.
● If the CDs are dirty or have label adhesive on their surface,
make sure to clean them before loading.
● If the button, any of the CD PLAY 1 - 3 buttons
or the OPEN/CLOSE button is pressed when a disc tray
is open, the disc tray will close automatically. Be careful not
to catch your fingers.
● If the unit is shaken by impact or vibration, playback may be
disrupted. If the playback volume of a CD is raised excess-
ively, playback may be disrupted. If this occurs, lower the
playback volume.
1 -
CD PLAY
3
1 -
CD PLAY
3
MD-C2H(SUK) TINSE0238AWZZ
12