Sharp MD-C2H Speaker System User Manual


 
<P=002>
COMPACT DISC OPERATION
Loading and playing CDs
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the CD(s) on the disc tray, label side up.
CDs can be placed on any open position on the disc tray.
Be sure to place 8 cm (3") CD(s) in the middle of the disc
trays.
Caution:
Do not stack CDs in the tray.
This can damage the player and the CDs.
5 When loading a third disc, press the CD SKIP button to turn
the disc tray, then place the CD in the open position.
6 Press the OPEN/CLOSE button to close the disc tray.
The total number of tracks and the total playing time for one
disc will be displayed. At this time, the red frame that corre-
spouds to the selected disc will flash.
7 Press the button.
Playback will begin from track 1 on the disc whose disc frame
is flashing.
After the disc finishes playing, the next disc will automatically
play.
When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will be played.
When the last track on the third disc has finished playing, the
unit will stop automatically.
1 -
CD PLAY
3
1 -
CD PLAY
3
4
3,6
5
1
2
7
7
2
1
5
To select the disc to start with and have the unit per-
form continuous playback:
Press the CD PLAY 1 - 3 button whose number matches
the frame which is currently flashing.
Press the button.
Press the button.
All three discs, starting from the selected disc, will be played
continuously.
To interrupt playback:
Press the button.
" " will appear.
To resume continuous playback from the point where
playback was interrupted:
Press the button again.
To stop playback:
Press the button.
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press
the CD SKIP button to rotate the disc tray and remove the
remaining disc.
After use:
Press the ON/STAND-BY button to enter the stand-by mode.
To select the next disc number:
When stopped, press the CD SKIP button.
Press the button.
Playback of the next disc will begin, after which each
following disc will be played sequentially.
Notes:
When the CD SKIP button is pressed during playback, playback
will begin automatically from the next disc. (It is not necessary
to press the button again.)
When one of the CD PLAY 1 - 3 buttons is pressed
during playback, playback of the selected disc will begin auto-
matically.
(It is not necessary to press the button again.)
12 cm (5")
8 cm (3")
The red frame that corre-
sponds to the selected CD
will flash.
Total number of tracks Total playing time
MD-C2H(SUK) TINSE0238AWZZ
11