Filter
Top Products
LSP 500 PRO | 47
The operating menu
Selecting a network and connecting the LSP 500 PRO to the
selected network
To select a wireless network and to connect the LSP 500 PRO to the selected
network:
X In the WLAN menu, turn the MENU jog dial until the SSID LIST SELECTION menu
item is displayed.
X Press the MENU jog dial to open the SSID LIST SELECTION menu item.
The available networks are shown on the display panel. Encrypted networks
are marked with a lock icon.
X Turn the MENU jog dial to browse up or down through the available networks.
X Press the MENU jog dial to establish a connection to the selected network.
A tick () next to the network name indicates the network to which the
LSP 500 PRO is connected. The lock icon indicates a secure network.
If a network is not encrypted, the connection is established immediately. If
a network is WPA2-encrypted, you first have to enter the network key. For
information on how to enter the network key, refer to page 49.
SSID List Selection