Filter
Top Products
LSP 500 PRO | 17
Using the LSP 500 PRO
Additional indications in the status area
The following additional icons can appear in the status area of the display panel:
Icon Explanation
Icon is displayed steadily: Bluetooth is activated and
one device is paired.
Icon is displayed flashing: Pairing mode is activated
to allow Bluetooth devices to pair.
WLAN is activated and the LSP 500 PRO is connected
to a network.
Status of the USB player:
• Play
• Pause
• Record
Escape function
When you call up any menu item and
ESC is displayed in the upper left corner of
the display panel, you can exit the menu item without storing the settings made.
When navigating the operating menu, the escape function also allows you to
return to the previous menu level.
X Press the SLOT 1 jog dial to call up the escape function and to exit a menu
without storing the settings.
X Press the SLOT 1 jog dial to return to the previous menu level.
Adjusting the volume
To adjust the input volume of the inputs:
X Turn one of the six input jog dials (SLOT 1, SLOT 2, SLOT 3, MIC, AUX IN, USB).
The icon for the corresponding input is shown on the left of the volume bar.
The LEDs directly above the SLOT 1, SLOT 2, SLOT 3 jog dials and directly
below the MIC, AUX IN, USB jog dials indicate the level of the corresponding
input. If an LED flickers green, a signal is present at the input. If an LED
flickers or lights up red, the signal is overmodulated. The LED of the USB
input cannot light up red.
To adjust the overall volume.
X Turn the MASTER VOLUME jog dial.
The icon for the overall volume is shown on the left of the volume bar.
You can adjust the volume from -96 to +6 dB.