Filter
Top Products
18 | LSP 500 PRO
Using the LSP 500 PRO
Confirmation of stored settings
Once you have adjusted a setting in the menu and stored it or when you have
activated a function, the display panel displays
STORED.
Display time out
Once you have finished adjusting settings in the menu, all open menu items are
automatically closed and the display panels returns to the home screen. The USB
player and the test sound menu are not affected by this and remain open.
Lock mode
You can activate a lock mode that locks the jog dials against accidental use. This
prevents settings from being inadvertently changed during operation.
Activating the lock mode
X Simultaneously press the SLOT 1 and MIC jog dials for at least 2 seconds.
The lock mode is activated. The display panel temporarily displays
LOCKED.
If you turn or press a jog dial when the lock mode is activated,
LOCKED is also
briefly displayed. However, when the lock mode is activated, the POWER
on/off switch can still be used.
Deactivating the lock mode
X Simultaneously press the SLOT 1 and MIC jog dials for at least 2 seconds.
The lock mode is deactivated and the home screen is displayed.
Lock mode behavior when the LSP 500 PRO is operated using a tablet
If you operate the LSP 500 PRO using a tablet (see page 23), the lock mode
is automatically activated. When you deactivate the lock mode directly on the
LSP 500 PRO, and as long as you operate the LSP 500 PRO using the tablet, the
lock mode is automatically reactivated after 1 minute of inactivity.
Activating ground lift
If there is humming or buzzing noise coming from the input signal cables, you can
disconnect pin 1 of the LINK IN XLR input from the ground:
X Set the GROUND LIFT switch to position LIFT.