Filter
Top Products
212
Adding Effects
Reverb Type
Selects the type of reverb.
Value
0 (Off):
Reverb is not used.
1 (Reverb):
Normal reverb
2 (SRV Room):
This reverb simulates typical room acoustic
reflections.
3 (SRV Hall):
This reverb simulates typical concert hall
acoustic reflections.
4 (SRV Plate):
This reverb simulates a reverb plate, a
popular type of artificial reverb unit that
derives its sound from the vibration of a
metallic plate. You can also achieve unusual
metallic-sounding reverbs using “SRV
Plate.”
5 (GM2 Reverb):
General MIDI 2 reverb
Reverb Level
Adjusts the volume of the sound that has passed through
reverb.
Value:
0–127
Reverb Output Assign
Specifies how the sound routed through reverb will be output.
Value
A:
Output to the OUTPUT A (MIX) jacks in stereo.
B:
Output to the OUTPUT B jacks in stereo.
MFX1–3 Source (Multi-Effects 1 Source)
Selects the multi-effects parameter settings that will be used by
the performance. If you wish to use the performance settings,
select “PRF.” If you wish to use the settings of the patch/
rhythm set assigned to one of the parts, select the part number.
Value:
PRF, P1–P16
Chorus Source
Selects the chorus parameter settings that will be used by the
performance. If you wish to use the performance settings, select
“PRF.” If you wish to use the settings of the patch/rhythm set
assigned to one of the parts, select the part number.
Value:
PRF, P1–P16
Reverb Source
Selects the reverb parameter settings that will be used by the
performance. If you wish to use the performance settings, select
“PRF.” If you wish to use the settings of the patch/rhythm set
assigned to one of the parts, select the part number.
Value:
PRF, P1–P16
16
17
18
19
When Patch or Rhythm Set Settings Are
Selected
When the patch or rhythm set’s multi-effects settings are
selected, those settings are shown in each of the performance’s
multi-effects setting screens, and the settings can be then be
changed as well. Changes to patch or rhythm set multi-effects
parameter settings are lost when another patch or rhythm set is
selected. To keep the modified settings, save the patch/rhythm
set settings (p. 59, p. 86).
20
When Patch or Rhythm Set Settings Are
Selected
When the patch or rhythm set’s chorus settings are selected,
those settings are shown in each of the performance’s chorus
setting screens, and the settings can be then be changed as well.
Changes to patch or rhythm set chorus parameter settings are
lost when another patch or rhythm set is selected. To keep the
modified settings, save the patch/rhythm set settings (p. 59, p.
86).
21
When Patch or Rhythm Set Settings Are
Selected
When the patch or rhythm set’s reverb settings are selected,
those settings are shown in each of the performance’s reverb
setting screens, and the settings can be then be changed as well.
Changes to patch or rhythm set reverb parameter settings are
lost when another patch or rhythm set is selected. To keep the
modified settings, save the patch/rhythm set settings (p. 59, p.
86).
Fantom-X678_r_e.book 212 ページ ２００５年５月１２日 木曜日 午後４時４０分