Filter
Top Products
17
Panel Descriptions
[STOP]
Controls sequencer stop.
While stopped, you can hold down [SHIFT] and Press [PLAY] to
perform MIDI Update. -> (p. 165)
[REC]
The display changes to the Recording Standby window. -> (p. 170)
If you press this during recording, the Rehearsal function will be
activated. -> (p. 173)
DISPLAY
Display
This displays information regarding the operation you are
performing
[MENU]
Opens the MENU. The contents of the menu will depend on the
current mode.
Function buttons ([F1]–[F8])
During editing, these buttons execute a variety of functions, and
their function will differ depending on the screen.
[TEMPO]
Sets the tempo (BPM). -> (p. 128, p. 135, p. 166)
LCD CONTRAST knob
Adjusts the display contrast. -> (p. 22)
[WRITE]
Save edited settings into Temporary Area or a memory card. -> (p.
59, p. 86, p. 120, p. 132, p. 134, p. 159, p. 198, p. 225)
[PATCH EDIT]
Make patch-related settings.
[SONG EDIT]
Make settings for song data and song edit. -> (p. 164)
[EFFECTS]
Make effect-related settings. Here you can also make mastering
settings. -> (p. 206)
[MIXER]
View the Performance mode’s Mixer screen. -> (p. 103)
[LAYER/SPLIT]
View the Performance mode’s Layer screen. -> (p. 100)
[PATCH/RHYTHM]
Enter Patch/Rhythm mode. -> (p. 38)
VALUE Dial
This is used to modify values. If you hold down [SHIFT] as you turn
the VALUE dial, the value will change in greater increments.
[DEC], [INC]
This is used to modify values. If you keep on holding down one
button while pressing the other, the value change accelerates. If you
press one of these buttons while holding down [SHIFT], the value
will change in bigger increments.
[CURSOR]
Moves the cursor location up/down/left/right.
[SHIFT] (JUMP)
This button is used in conjunction with other buttons to execute
various functions.
[ENTER]
Use this button to execute an operation.
[EXIT]
Return to the previous screen, or close the currently open window.
In some screens, this causes the currently executing function to be
aborted.
DYNAMIC PAD / SAMPLING
[SAMPLE EDIT]
Edit a sample. -> (p. 148)
[SAMPLE LIST]
View the sample list. -> (p. 146)
[SAMPLING]
View the Sampling Menu screen. -> (p. 142)
[SKIP BACK SAMPLING]
Sample the performance for a specified duration prior to the moment
you pressed the button. -> (p. 145)
[PAD SETTING]
Make pad settings. -> (p. 160)
[CLIP BOARD]
You can register frequently used screens and use the pads to recall
them (the Bookmark function). -> (p. 37)
[SAVE/LOAD]
Saves/loads data in the Temporary Area (p. 29) or sample memory
(p. 32) to/from user memory or a memory card.
[PAD 1–16]
Use as a keyboard to play sound.
[ROLL]
Turn “roll” playback on/off. -> (p. 160)
[HOLD]
Turn “hold” (sustaining the sound after you release the pad) on/off.
->(p. 160)
Pitch Bend/Modulation Lever
This allows you to control pitch bend or apply vibrato.
Here you can install a wave expansion board (SRX series; sold
separately) or install separately sold memory (DIMM).
On the Fantom-X6/X7, this is located on the bottom panel. -> (p.
240, p. 242)
[PIANO MODE]
Switches to a special mode optimal for playing piano sounds. If you
press this button while holding down [SHIFT], the Live Setting Play
screen will appear. -> (p. 54)
7
8
9
10
11
12
13
14
15
Fantom-X678_r_e.book 17 ページ ２００５年５月１２日 木曜日 午後４時４０分