Filter
Top Products
Basic Operation
BASIC
53
En
Reducing Noise During Playback (DIGITAL NR Function)
To reduce extraneous noise switch on DIGITAL NR. This feature is effective with sources containing a lot of
background noise like cassette and video tape.
1
Press the DIGITAL NR button on the
remote control’s AMP MAIN screen
or on the front panel.
Each press switches DIGITAL NR on or off.
• In cases described below, noises may not be reduced
even if DIGITAL NR is on.
· Sudden noise
· Extremely loud noise
· Signals that contain too many high frequencies.
· Signals recorded with little background noise.
• DIGITAL NR is effective at levels shown below for each
source.
STEREO (excluding 96 kHz)
· Analog input ..................................................... 10-18 dB
· Digital input ......................................................10-15 dB
· AM/FM tuner ...................................................10-15 dB
ADVANCED/STANDARD/96 kHz stereo ................ 6-10 dB
• Depending on the condition of the source, there may not
be a noticeable improvement in the quality of the sound.
• You can’t use the DIGITAL NR mode with the HOME THX
modes.
• If you set the DIGITAL NR on in DIRECT mode the
amplifier will switch to STEREO mode.
• If you set the DIGITAL NR on in MULTI CH IN DIRECT
mode, the amplifier automatically switches to MULTI CH
IN ADJUST mode.
1
MAIN
MAIN SUB
(DVD-A
/SACD)
DIGITAL
NR
ACOUSTIC
CAL.
MIDNIGHT
LISTENING MODE
LISTENING
CH SEL.
MULTI CH
IN
THX
STANDARD
SURROUND
ADVANCED
CONCERT
ADVANCED
CINEMA
STEREO
/DIRECT
Amplifier
memo
1
MAIN SUB
(DVD-A
/SACD)
DIGITAL
NR
ACOUSTIC
CAL.
MIDNIGHT
LISTENING MODE
LISTENING
CH SEL.
MULTI CH
IN
THX
STANDARD
SURROUND
ADVANCED
CONCERT
ADVANCED
CINEMA
STEREO
/DIRECT
Amplifier
1
Press the ACOUSTIC CAL. button on
the remote control’s AMP MAIN
screen or on the front panel.
Each press switches acoustic calibration EQ between
ALL CH ADJ, FCH ALIGN and OFF.
• After completing the AUTO SURROUND SETUP
(p.14-16), or setup using AUTO (p.43), ACOUS-
TIC CAL ON (ALL CH ADJ) is set automatically.
• If you turn ACOUSTIC CAL. on in MULTI CH IN
DIRECT mode, the amplifier automatically
switches to MULTI CH IN ADJUST mode.
• If you turn ACOUSTIC CAL. on in DIRECT mode,
the amplifier automatically switches to STEREO
mode.
Listening with Acoustic Calibration EQ
You can listen to the soundtrack with the Acoustic Calibration EQ you set in AUTO SURROUND SETUP or on
page 43. To do so follow the instructions below. For information about each Acoustic Calibration EQ mode, see
page 43-44.
1
MAIN
memo
1