Filter
Top Products
SURROUND SETUP
39
En
Setting Up for Surround Sound
2.1. Speaker Systems
Manual Free
” Normal Surround ”
Front [LARGE]
Center [LARGE]
Surround [LARGE]
SurrBack [LARGE
X
2 ]
Subwoofer [ YES ]
( NEXT)
3,4
2.1. Speaker Systems
Manual Free
Speaker System Select
[ Normal Surround ]
( Next)
2
2.1. Speaker Systems
[Manual Free]
[Manual THX]
(all small)
[Auto]
[Return]
2.1. Speaker Systems
Manual Free
” Normal Surround ”
Front [LARGE]
Center [LARGE]
Surround [LARGE]
SurrBack [LARGE
X
2]
Subwoofer [ YES ]
( NEXT)
7
1
5˜∞ buttons
ENTER
STANDBY/
O
1
SPEAKER SYSTEMS should be
selected. If it isn’t use the 5∞ buttons
to select it. Press the ENTER button.
The setup possibilities appear on your TV.
2
Use the 5∞ buttons to select the
speaker system setting.
Choose from:
MANUAL FREE: Sets all the speakers
MANUAL THX: All speakers are set to SMALL. You can
select the number of surround back speakers.
AUTO: All speakers are set automatically. (The micro-
phone must be hooked up to the front panel in order to
use this setting.)
For MANUAL FREE, select it and press ENTER. Then go
to step 3.
For MANUAL THX, select it and press ENTER. Then go
to step 3.
For AUTO, select it and press ENTER. Be prepared for
loud test tones and make sure the room is free of ambient
noise (see memo page 16). When you see OK on the OSD
the setup is finished. Go to step 9.
3
Use the 2 3 buttons to select either
NORMAL SURROUND or FRONT BI-
AMP (5.1).
NORMAL SURROUND: For normal home theater use
FRONT BI-AMP (5.1): Settings for bi-amp (see p.67).
4
Use the ∞ button to go to the next
screen.
5
With the 5∞ buttons choose the set of
speakers that you want to set.
If you selected MANUAL THX in step 2 set all speakers,
except for surround back, to SMALL.
6
Use the 2 3 buttons to choose the size
and number for each set of speakers as
well as LARGE, SMALL, YES, NO or
PLUS.
7
Repeat steps 5 & 6 for all speakers
channels.
2.Surround Setup
[ Check ]
[ 1.Speaker Systems ]
[ 2.Channel Delay ]
[ 3.Channel Level ]
[ 4.Acoustic Cal EQ ]
[Return]
5