Pioneer VSA-AX10 Stereo Amplifier User Manual


 
PREPARATION
PREPARATION
Connecting Your Equipment
25
En
7 Coaxial cords/Optical cables
Commercially available digital audio coaxial
cords (standard video cords can also be used) or
optical cables (not supplied) are used to connect
digital components to this amplifier.
Be sure to insert completely and in the case of
the optical cable, right-side up. If it is inserted
improperly it can break the shutter on the
optical terminal (this won't, however, affect the
connection or insertion of an optical cable).
Coaxial cord
(or standard composite
video cord)
Optical cable
Digital Input Default Settings
Unlike analog connections, the jacks for digital connections are not dedicated to one type of component,
they can be used freely. Thus you must tell the amplifier what digital component is connected to which
jack so your components will be in sync with the names on the remote control buttons and the like. To
avoid having to assign the digital inputs you can hook up your equipment in accordance with the amplifi-
er's default settings.
The default settings are:
DIGITAL IN 1 (coaxial): DVD/LD
DIGITAL IN 2 (coaxial): TV
DIGITAL IN 3 (coaxial): CD
DIGITAL IN 4 (optical): SAT
DIGITAL IN 5 (optical): VCR1/DVR
DIGITAL IN 6 (optical): VCR2
DIGITAL IN 7 (optical): CD-R/TAPE 1/MD
2 RF IN (coaxial): DVD/LD
See "Assigning the Digital Inputs" on p.80 if the way you hook up your equipment is different from the
default settings.