Filter
Top Products
53
En
12 Connecting Up
Watching TV
With the above connections made, your TV becomes another
source component for this system.
To play your TV through this system, press the
AUDIO A-1 or A-2 button (depending on
which one the TV is connected to).
If the TV is connected to AUDIO 1, memorize its remote
control codes in the AUDIO A–1 multi control button. If it
is connected to AUDIO 2, memorize its remote control codes
in the AUDIO A–2 multi control button. See chapter 11 for
more on this.
Playing your TV through this
system
When watching cable or satellite TV, it’s best to connect the
cable/satellite box directly to this system, rather than going
via the TV. However, if you’re watching TV via an antenna
plugged directly into the back of the TV, then connect your
TV’s audio outputs to the AUDIO 1 or AUDIO 2 inputs of
this system to play the TV’s audio through the speakers of this
system. Use a standard stereo audio cord (not supplied),
matching up the colors both ends for best results.
Connect to AUDIO 1 IN or AUDIO 2 IN
White
White
Red
Red
TV
Connecting to a TV with the
supplied video cord
Important: Before making or changing any rear panel
connections, switch off the power and disconnect the power
cord from the AC outlet.
You can connect this system to any TV using this output jack
with the supplied video cord. However, if your TV has an
S-Video input, we recommend also using that since you
should get a better picture.
Refer to the TV’s instruction manual for more detailed
connection instructions.
Connecting to a TV with an
S-Video cord
Many TVs also have an S-Video input which you can use to
connect to this system using an S-Video cord (not supplied).
Refer to the TV’s instruction manual for more detailed
connection instructions.
Yellow
Yellow
TV
TV