Pioneer HTZ-55DV Stereo System User Manual


 
20
En
4 Shaping the Sound
Adjusting the bass and treble
The simplest way to shape the sound is by adjusting the amount of bass and treble.
Note: The bass and treble controls have no effect when using the DSP modes, or when
the Dolby/DTS mode is set to anything other than AUTO, STANDARD or SURROUND
OFF
.
1 Press SYS then SOUND
CONTROL.
2 Use the @ or # buttons to select BASS or TREBLE.
3 Use the % and buttons to adjust the sound.
You can see the current level in the display.
4 Press ENTER to set the level.
Using P.Bass
In addition to the standard controls for adjusting bass and treble, this system has a
P.Bass feature. Switch this on to further extend the bass.
Note: P.Bass has no effect when listening through headphones.
Press SYS then P.BASS to switch P.BASS on or off.