Filter
Top Products
26
En
5 Using the DVD Player
More programming options
There are several other options available when programming/using playlists.
• To view the playlist, press SHIFT then PGM.
• To put a pause in the playlist, press 8 instead of a number.
• You can’t program two pauses in succession, or start/end a playlist with a pause.
• To delete an entry from the playlist, position the cursor on the
title/chapter/track number and press C (Clear).
• To insert an entry into the playlist, position the cursor where you
want the title/chapter/track to appear, then enter its number.
All the following entries move up one.
• To add an entry to the end of the playlist, press SHIFT then PGM,
enter the title/chapter/track number, then press SHIFT and PGM
again.
• To add the currently playing title/chapter/track to the playlist,
press SHIFT then hold PGM for about 2 seconds.
• If there is no current playlist, a new one is created. (For DVD: if the last playlist
programmed was for titles, then a title playlist is created; otherwise a chapter playlist
is created.)
• To delete the playlist, press 7 to stop playback, then press C
(Clear).
• To delete a memorized DVD playlist, load the DVD disc, press
SHIFT then PGM, then change the Program Memory option to
Off. Press ENTER to confirm.
Programming a CD/Video CD playlist
1 Press SHIFT then PGM.
Program Track
Current: Track
Total Time
0.00
1(/10)
PROGRAM
Exit
ENTER
PlayMove
––
––
––
––
––––
–– –– ––
––
––
––
––
––
––
––
––
––
–– –– –– –– –– ––
2 Start entering track numbers.
For tracks 1 to 10, use the corresponding number button. For 11 and over, use the >10
button (>10,
2
,
4
for 24, etc.)
3 Press ENTER to start playback immediately, or SHIFT then PGM to
exit if you want to start playback later*
* You can’t start program playback later with a PBC Video CD: press ENTER to start.