Filter
Top Products
36
En
9 DVD Settings
Audio settings
Dolby Digital Out
• Set in Setup Navigator (Default: Dolby Digital)
You only need to make this setting if you connected this
system to another component (MD recorder, etc.) using
one of the digital outs.
When recording a Dolby Digital disc to an MD or CD recorder,
set this to Dolby Digital 3 PCM. When you're done
recording, set it back to Dolby Digital for proper playback
of Dolby Digital discs.
Move
Exit
SETUP
Dolby Digital Out
Change Dolby Digital output mode
96kHz PCM Out –
Dolby Digital 3 PCM
Dolby Digital
Language
Video
GeneralAudio
Linear PCM Out
• Set in Setup Navigator (Default: 96kHz)
You only need to make this setting if you connected this
system to another component (MD recorder, etc.) using
one of the digital outs.
When recording a 96kHz/24-bit disc to an MD or CD recorder,
set this to 96kHz 3 48kHz. When you're done recording,
set it back to 96kHz for proper playback of 96kHz/24-bit
discs.
Dolby Digital Out –
DTS Out
96kHz PCM Out
Move
Exit
96kHz
96kHz 3 48kHz
Dolby Digital
SETUP
Chenge 96 kHz output mode
Language
Video
GeneralAudio
Language settings
Audio Language
• Default Setting: English
This setting is your preferred audio language for DVD discs. If
the language you specify here is recorded on a disc, the system
automatically plays the disc in that language (although this
depends on the Auto Language setting—see Auto Language
on page 37).
Setup audio language
OSD Language – English
Audio Language - English
Subtitle Language - Japanese
Auto Language - Japanese
Move
Exit
English
French
Spanish
Other
SETUP
Audio General
Video
Language
The DVD format recognizes 136 different languages. Choose
Other if you want to specify a language other than those
listed, then follow the on-screen display to select a language.
You may also want to refer to the DVD language code list on
page 59.
Setup audio language
+/–
Audio Language
SETUP
Move
Exit
ENTER
Select
Return
ja: Japanese
List of Languages
Code (0~2)
1001
RETURN
Audio General
Video
Language
Remember: You can switch between the languages
recorded on a DVD disc any time during playback using the
AUDIO button. (This does not affect this setting.)