Pioneer HTZ-55DV Stereo System User Manual


 
3 Getting Started
14
En
Button What it does
Numbers
If the disc is stopped, playback starts
from the selected title number. If
the disc is playing, playback jumps
to the start of the selected chapter
number.
>10 Selects titles/chapters 11 and over.
(For example, for 24, press >10 , 2,
4
.)
e Press & hold for about 2 seconds to
start slow-motion reverse scanning.
Change the speed using the e
and E buttons.
When playing, press once to pause;
reverse a single frame with each
subsequent press.
E Press & hold for about 2 seconds to
start slow-motion forward scanning.
Change the speed using the e
and E buttons.
When playing, press once to pause;
advance a single frame with each
subsequent press.
* While using the DVD, you may see the
or mark displayed on-screen.
means that the operation is not
allowed by the system.
means that the operation is not
allowed by the disc.
1 Press DVD.
Alternatively, press FUNCTION on the
front panel to select DVD.
2 Load a DVD disc.
Press 0 OPEN/CLOSE to eject the
disc tray.
Place a disc in the tray, label side face
up, making sure it is seated properly in
the disc guide.
Press 0 OPEN/CLOSE to close the
disc tray. Many DVD-Video discs start
playing automatically.
3 Basic playback controls*
Button What it does
3 Starts/resumes playback
8 Pauses a disc that’s playing or
restarts a paused disc
7 Stops playback. Display shows
RESUME (press 3 to start
playback again from the last place
stopped).
1 Press & hold for fast reverse
scanning. (After 5 seconds,
scanning continues even after
releasing the button: press 3 to
resume normal playback.)
¡ Press & hold for fast forward
scanning. (After 5 seconds,
scanning continues even after
releasing the button: press 3 to
resume normal playback.)
4 Skips to the start of the current
chapter, then to previous chapters.
¢ Skips to the next chapter.
Playing DVD Video discs
Only the basic controls for playback of DVD discs are covered here. Further functions are detailed
in the next chapter.