Filter
Top Products
47
En
11 Controlling Other Equipment
Clearing all remote control settings
This clears all presets, all learnt functions and restores the factory presets.
1 Press and hold REMOTE SETUP for three seconds.
The LED at top of the remote blinks twice.
2 Press any MULTI CONTROL button.
3 Use the number buttons to enter 981.
The LED blinks a total of four times to indicate the button has been cleared.
Checking preset codes
To check which preset code is associated with a MULTI CONTROL button:
1 Press and hold REMOTE SETUP for three seconds.
The LED at top of the remote will blink twice.
2 Press the MULTI CONTROL button you want to check the preset
code for.
3 Use the number buttons to enter 990.
Each preset code consists of four digits, for example 1329. Each digit will be represented
by a series of blinks on the remote’s LED—3 blinks to represent the digit “3”, etc.
4 Press 1.
The blinking LED indicates the left-most digit of the preset code (“1” in the example
above).
5 Press 2.
The blinking LED indicates the next digit of the preset code (“3” in the example above).
6 Press 3.
The blinking LED indicates the next digit of the preset code (“2” in the example above).
7 Press 4.
The blinking LED indicates the right-most digit of the preset code (“9” in the example
above).