Philips DFR9000 Home Theater System User Manual


 
ENGLISH 47
Digital video section (input/output) According HDMI 1.1, HDCP 1.1 and DVI 1.0 standards.
Following formats are supported:
‘Source only’ mode 50 Hz (TV):
- 576p (720 x 576p) - EIA/CEA-861B format # 17, 18;
- 720p (1280 x 720p) - EIA/CEA-861B format # 19;
- 1080i (1920 x 1080i) - EIA/CEA-861B format # 20.
60 Hz (TV):
- 480p (720 x 480p) - EIA/CEA-861B format # 2, 3;
- 720p (1280 x 720p) - EIA/CEA-861B format # 4;
- 1080i (1920 x 1080i) - EIA/CEA-861B format #5.
60Hz (PC):
- VGA (640 x 480p);
- SGVA (800 x 600p);
- XGA (1024 x 768p);
- SXGA (1280 X 1024p).
‘Repeater’ mode All modes are supported (up to 1080i, SXGA)
Audio over HDMI PCM (32 kHz, 44.1 kHz, 48 kHz), Dolby Digital or DTS digital audio transmission at a sample
rate of 32-96 kHz Fs
Tuner
Tuner bands FM, FM-Mono, MW, DAB
FM Tuner Frequency range: 87.5-108 MHz
Antenna input: 75 ohm
MW Tuner Frequency range: 531 kHz - 1602 kHz
Antenna input: 300 ohm
DAB Tuner Band: III (174-240 MHz) + L (1452-1492 MHz)
Antenna input: 50 ohm
DLS (Dynamic Label Service) radio text support via on screen display
General HDMI: Compatible with DVI 1.0 (HDCP) devices
Power requirements: AC 220-230V, 50/60 Hz
Power consumption: 130 W typical at 1/8 P rated
In standby: 0.48 W
Dimensions: 435 x 380 x 95 mm
Weight (without package): 7 kg
Specifications are subject to change without notice, due to improvements.