Philips DFR9000 Home Theater System User Manual


 
ENGLISH 27
1
2
3
4
7. Operating the amplifier
Note:We will describe operating the amplifier via the buttons on the remote control. If buttons on the
local keyboard are required for operation, these buttons will be mentioned.
7.1 Source selection
Use SELECT (3) to select RECVR.
> You can now operate your DFR9000.
Use the source selection buttons (4) to select the sources connected to your DFR9000.
> The left display shows the selected source, followed by the type of input signal (audio,
video).The middle display shows the name of the input sockets the source is connected
to.
Note: If, in the ‘AV input’ menu, audio and video are set to ‘None’ for a source, it is not possible to
select this source on your DFR9000. See ‘10.7 A/V input menu’.
7.2 Sound control
Use SELECT (3) to select RECVR.
Use the source selection buttons (4) to select the desired A/V source.
Volume
Use – VOL + (10) to adjust the volume.
Press c MUTE (11) to mute the sound of the active source.
Bass
1 Press BASS/SUBTITLE (12).
2 Use – VOL + (10) to decrease/increase the bass response.
Treble
1 Press TREBLE/ANGLE (13).
2 Use – VOL + (10) to decrease/increase the treble response.
Loudness
Press LOUDNESS/MONITOR (15) repeatedly to toggle between loudness on and off.
Rear volume
1 Press REAR/AUDIO (18).
2 Use – VOL + (10) to adjust the volume of the surround speaker.
Subwoofer volume
1 Press SUB/ZOOM (19).
2 Use – VOL + (10) to adjust the volume of the subwoofer.
7.3 Selecting surround modes
What surround modes can be selected depends on which speakers are connected and on the
type of the incoming signal.The available surround modes are displayed in the middle display.
For an overview and explanation of possible surround modes, see '10. Surround modes'.
Use SURROUND (17) to select the various surround modes.
Installed speakers L/R - L/R + C - L/R + SL/SR/SB
- L/R + SL/SR - LR + C + SL/SR/SB
- L/R + C + SL/SR
Input signal
Mono Mono Mono Mono
Stereo Stereo 1. Stereo 1. Stereo
(including FM, DAB) 2. DPLII movie 2. DPLIIx movie
3. DPLII music 3. DPLIIx music
4. DTS Neo:6 cinema 4. DTS Neo:6 cinema
5. DTS Neo:6 music 5. DTS Neo:6 music
Surround Stereo 1. Stereo 1. Stereo
2. Dolby Digital or DTS 2. Dolby Digital or DTS
3. Dolby Digital EX or DTS ES
Multichannel analogue - - - - - - - - - - - -
input