Filter
Top Products
• Connect an optional S-Video connection cable between the S-Video output of a DVD
player/recorder and the DVD IN input socket (21 - lower row) of your DFR9000.
• Connect an optional S-Video connection cable between the S-Video input of a DVD
recorder and the REC OUT output socket (21 - lower row) of your DFR9000.
• For audio connection to the TV, game console and DVD player/recorder, see ‘Connecting
analogue equipment.
CVBS connection
• Make sure the receiver is switched off and unplugged from the wall outlet before making
any connections.
• Connect an optional 1-cinch connection cable between the CVBS output of a TV and
the VIDEO TV IN input socket (21 - upper row) of your DFR9000.
• Connect an optional 1-cinch connection cable between the CVBS output of a game
console and the VIDEO GAME IN input socket (21 - upper row) of your DFR9000.
• Connect an optional 1-cinch connection cable between the CVBS output of a DVD
player/recorder and the DVD IN input socket (21 - upper row) of your DFR9000.
• Connect an optional 1-cinch connection cable between the CVBS intput of a DVD
recorder and the REC OUT output socket (21 - upper row) of your DFR9000.
• For audio connection to the TV, game console and DVD player/recorder, see ‘Connecting
analogue equipment.
4.8 Connecting speakers
We will describe connection of a complete setup of seven speakers (including subwoofer and
surround back speaker), but everyone’s home setup will vary. Simply connect the speakers you
have as described below.The receiver will work with just two stereo speakers (the front
speakers in the illustration) but a complete setup is best for surround sound. As a minimum we
recommend five speakers (two front speakers, a centre speaker and two surround speakers) for
good surround sound. It is possible to reproduce some kind of surround sound with fewer
speakers.This is done by redirecting the signals which are intended for the missing speakers to
the existing ones. See '6.4 Setting the speaker size and distance', '6,5 Setting the speaker
volume' '10.2 Balance menu' and '10.3 Speakers menu' on how to set up the receiver correctly
for the number and size of the speakers used.
Notes:
– Always switch off your receiver before making any connections.
– Speakers with a nominal impedance of 4 Ω and 8 Ω can be connected, but speakers with a
nominal impedance of 4 Ω give the best performance.
General
1 Twist exposed wire strands together.
2 Loosen speaker terminal and insert exposed wire.
3 Make sure you connect the speaker on the right to the right terminal and the speaker
on the left to the left terminal.Also make sure the + and - cables are connected to the
correct speaker terminals (+ to + and - to -).
4 Tighten terminal.
CD IN CD-R IN AUX IN
CVBS OUT
CVBS OUTCVBS IN
CVBS OUT
Game console
TV
DVD recorder
20 ENGLISH