Filter
Top Products
46 ENGLISH
13.Technical specifications
Audio section
Power amplifier Rated RMS output: 2 x 110 W (4 ohm, 1 kHz with 1% Total Harmonic Distortion)
6 x 65 W (4 ohm, 1 kHz with 1% Total Harmonic Distortion)
Dynamic power: 2 x 130 W (4 ohm)
6 x 90 W (4 ohm)
Maximum power: < 190 W per channel
Signal-noise: 105 dBA
Frequency response: 5 Hz - 45 kHz
Ouput terminals: 4 - 8 ohm
Total Harmonic Distortion 1 W - 1 kHz: 0.065 %
Digital output Coaxial out according IEC 60958 & IEC 61937 / 0.5 Vpp / 75 ohm /
PCM/Dolby Digital/DTS up to 96kHz
Digital input Optical and coaxial in according IEC 60958 & IEC 61937 / > 0.2 Vpp / 75 ohm /
32-96kHz, 24 bit PCM / DTS / DTS96/24 / Dolby Digital
Multichannel formats: Dolby Prologic IIx, Dolby Digital, Dolby Digital EX, DTS, DTS 96/24,
DTS ES Matrix, DTS ES Discrete, DTS NEO:6.
Line/Rec out Rated output: 1.6 Vrms
Signal-noise: 110 dBA
Total Harmonic Distortion: 0.0016 %
Frequency response: 5 - 100 kHz
Input sensitivity: 0.2 - 2.8 V
Input impedance: 22 kohm
ADC/DAC rated output: 96 kHz / 24 bits
Analogue video section (input/output)
Composite Video Signal level: 1 Vp-p/75 ohm
Frequency response: 0-6 Mhz
Signal-noise: > 50 dB
S-Video Signal level:Y - 1 Vp-p / 75 ohm
C - 0.286 Vp-P / 75 ohm
Frequency response: 0 - 6.5 MHz
Signal-noise: > 65 dB
Component Video/RGB Signal level:
Y - 1 Vp-p / 75 ohm
PB/CB, PR/CR - 0.7 Vp-p / 75 ohm
R, G, B - 0.7 Vpp / 75 ohm
Frequency response70: 0 - 7 MHz
Progressive: 0 - 16 MHz
Signal-noise: > 70 dB
Input resolutions/formats PAL: 576i (720 x 576i)
PAL progressive: 576p (720 x 576p, downscaled to 576i)
NTSC: 480i (720 x 480i)
NTSC progressive: 480p (720 x 480p, downscaled to 480i)
Input resolution PAL input 50 Hz (TV):
- 576i (720 x 576i);
- 576p (720 x 576p);
- 720p (1280 x 720p);
- 1080i (1920 x 1080i).
NTSC input 60 Hz (TV):
- 480i (720 x 480i);
- 480p (720 x 480p);
- 720p (1280 x 720p);
- 1080i (1920 x 1080i).