Philips DFR9000 Home Theater System User Manual


 
ENGLISH 41
Poor bass sound. Speakers are not in phase. Connect the coloured (or marked) wires to the
coloured terminals and the black (or unmarked) wires
to the black terminals.
Poor response of subwoofer. Subwoofer positioned too close to Position subwoofer closer to a corner.
the middle of the room.
Video problems Possible cause Solution
No picture. A/V input channel not selected on TV. Check the Instructions for Use of your TV for the
correct A/V input channel.
TV not switched on. Switch on your TV.
Wrong video input connected Make proper video connection.
to source.
No picture after setting resolution in TV does not support Undo setting via local (middle) display and
‘Picture’ menu (‘TV out’). selected resolution. select another resolution. See '10.5 Picture menu'
('TV out').
If possible, connect TV to CVBS OUT (22) or
make an S-Video connection via REC OUT (21).
No picture on TV when selecting a source, using The source device only delivers CVBS Connect the yellow cinch cable of the 6-cinch + Scart
VIDEO 1 IN(19) or VIDEO 2 IN (20). and no RGB signal. control to Scart cable to TV IN (21), GAME IN (21) or
DVD IN (21).and switch to a source using one of these
inputs.
Tuner problems Possible cause Solution
Bad radio reception, automatic programming does Your DFR9000 or the antenna is Change the position of the interfering source or
not work properly. positioned near a radiation source switch it off.
such as a TV, CD player, CD recorder,
DVD player, etc.
Weak antenna signal. AM: rotate the antenna for best reception.
FM/FM-M/MW: try to optimize reception with the
or § buttons (8).
Poor or disturbed radio reception or no reception DAB antenna not properly placed. Vary the position and direction of the antenna until
at all in DAB mode. you find the strongest reception and then secure the
antenna in that position.
Antenna supplied not strong enough Have a dedicated DAB antenna installed.
for receiving DAB signals.
Intermittent buzzing in tuner. Local interference. Move your DFR9000 or antenna away from
computers, fluorescent lights, motors or other electrical
appliances.