Filter
Top Products
9760-Graphics User Interface Manual
66
Icon The dialog box it brings on screen Functions of dialog box
This is the
Camera
Control
icon.
Clicking
on it
brings up
the Cam-
era Con-
trol box.
• To operate the joystick, put the cursor in the
white area and hold down the left button of the
mouse. As long as you hold it down the camera
will respond.
• Pressing the right button on the mouse puts the
joystick in TURBO (fast) mode and the circle
will turn red. Press the right button of the
mouse again to put it back in normal mode.
• The Focus, Zoom, and Iris buttons work when
the mouse is clicked and held down on an ar-
row in the button.
• Click on the auxiliary numbers to turn them
on/off, (red is off, blue means activated, and
green means the command has been received
by the 9760).
A camera selected with VCR input brings up the
VCR window pictured previously and if this icon
is pressed the VCR control window is activated as
shown below:
• The current camera number is displayed
(ie: the camera you can control using this
window)
• Click on Preset to choose a camera preset
position.
• To change the current camera, click on
the arrow buttons (above and below
STEP) to step through the camera logical
numbers (or place the cursor in the Cam
box and type in another number).
• Lock Override allows you to override a
camera locked to a monitor (if you have
equal or greater priority than the operator
who locked it)
• CC Override (Camera Control Over-
ride). If you try to control a camera which
is already being controlled by another op-
erator, ERROR: Busy operator xx will
appear at the bottom of the main screen
in the System Error box. Click on the CC
Override button to override that control.
If the override is successful, control of the
camera will now be available. If the op-
erator you want to override has a higher
priority, Error: Override denied will
appear in the System Error box.
15