Filter
Top Products
9760-Graphic User Interface Manual
14
NOTE: A PIN must be allocated to the Administrator for system features to be accessible (refer to
Work Station Set Up).
⇒ (a) Ensure the box next to Design in the Enter PIN window is not selected (i.e., no checkmark
appears in the box). If a checkmark appears in the box, place the mouse cursor over the Design
box and press the left hand mouse button once — the checkmark will disappear.
⇒ (b) Enter the Administrator password (default password is PACOM), then press Enter. All
Administrator features are available in this mode with the exception that no buttons can be
placed or programmed.
NOTE: Refer to Change Administration Password to change the default password from PACOM.
3.2.2 Administrator Screen
The screen illustrated in figure 3-1 appears when the administration password is used to log on to the sys-
tem. This screen provides access to all programming features available in the Graphic Controller program
(i.e., the Map, Button and Setup menu commands are available).
Figure 3-1: Administration Main Screen
Menu Line
Video icon
Area icon
Active Alarm icon
Manual Selector Box
Macro icon
Record icon
GPI icon
Arm Alarm icon
Control Menu Box
Title Bar
Minimize/Maximize buttons
Example of
an installation
map