Filter
Top Products
9760-Graphic User Interface Manual
12
NOTE: The company logo should be sized to match the size of the default logo.bmp. The Graphic
Controller program is ready to be customized. Refer to Chapter 3 for full details.
NOTE: The Graphic Controller program can also be started using Windows File Manager (Run).
Select GCON.EXE in the directory where all Graphic Controller files are stored.
2.3 SYSTEM REQUIREMENTS
IBM compatible PC
Motherboard: Minimum 386DX- 40 MHz.
Memory: 4 Mb RAM (8 Mb RAM recommended).
Hard disk: 100 Mb minimum recommended.
2 Mb required for Graphic Controller program.
Estimate 200 Kb per map (bitmap diagram).
MS Windows and MS DOS requirements.
Optional Sound and Video card requirements.
Serial ports: COM1: Address: 2F8 IRQ: 4 (to CM9760-CC1)
COM2: Address: 3F8 IRQ: 3 (to Mouse)
Parallel port: 1 x LPT1
Mouse: 1 x PC mouse (3 button mode supported and required).
Keyboard: 1 x AT compatible.
DOS: Version 5.0 or later.
Windows software: Version 3.1 or later.
GUI Software: Graphics Controller software.
Monitor
Type: Super VGA, 16 colors minimum (e.g. Trident 1 Meg Card).
Screen resolution: 800 x 600 (recommended).
Video option Hardware: Video Blaster card — Creative Labs SE100.
Coax cable to matrix with BNC to RCA adapter.
Address: 2AD6
IRQ: 10
Software: Video Blaster Pro software.
Sound option
Hardware: Sound Blaster Pro Card.
Speaker system with 3 mm audio plug.
Address: 220 H
IRQ: 5
DMA: 1
Software: Sound Blaster Pro software.