Filter
Top Products
Chapter Three: Maps and Administrator Features
12/97 9760-GUI 25
Figure 3-11: Button Selection Window.
3. “Not Used” or the window name will appear in the eight selection boxes.
(a) To restrict access to a window:
(i) Click ò next to the window that needs to be restricted from operators.
(ii) A window will appear that contains all the window names and a Not
Used option.
(iii) Select Not Used.
(b) To allocate access to a window:
(I) Click ò next to the window that needs to be allocated to operators.
(ii) A window will appear that contains all the window names and a Not
Used option.
(iii) Select the name of the window that should appear in this box.
4. When all options have been set, click on OK.
5. When complete save the changes (refer to Saving Files).
3.6.3 Monitor Setup
Monitor Setup window (illustrated in Fig 3-12) sets which 9760 monitor output will appear in the Video
window and which monitor the Graphic Controller program has control over. The number here should be
the same as the logical number for the monitor output as programmed in the 9760 Setup files.
Figure 3-12: Monitor Setup Window.
Various
Window
Boxes
This example illustrates that
operators have been denied
access to the Arm Alarm Window
Click to open the
window that
allocates/denies
access to windows