Filter
Top Products
9760-Graphic User Interface Manual
38
Option Description
Clear
Clears the Macro displayed in the Current Macro box. This Macro will
need to be reloaded to run again (refer to Macro No above).
Close
Click to close the Macro Control window.
4.4.6 Manual Selector Window
The Manual Selector window is used to select cameras and presets. This Current Camera box in the Manual
Selector is automatically updated when switches are made using the mouse or Camera Control window.
If a camera has been installed and added to the Camera Setup file, but it has not been updated in the
Graphic Controller program (e.g., illustrated on a map and had a button programmed), it can still be se-
lected using the Manual Selector window.
Figure 4-9: The Manual Selector window.
Option Description
Mon*
Click to select the logical monitor number
Mon box
Displays the currently selected monitor
“<<” B
Click to switch to previous logical monitor number.
“>>”F
Click to switch to the next logical monitor number.
Id OFF
Click to turn off/on the idents display.
NOTE: The camera ident can not be turned off from a node other than your own be-
cause the ident is being generated by the output board on the node that is used for the
tie line. The time and date can be turned off from any node because it is being gener-
ated by the output board of your own node and is connected to your monitor.
Text OFF
Click to turn on/off the hidden text of the video recorded via the video
amplifier.
Cam*
Click to select the logical camera number.
Current Camera box
Displays the logical number of the camera currently selected.
“<<”B
Click to switch to the previous logical camera number.
“>>”F
Click to switch to the next logical camera number.
Lock
Clicking toggles to lock and unlock the camera currently displayed in the
camera box
Preset*
Click to select (call) a preset number.
Monitor selector
Current Monitor
box
Camera selector
Switches to previous
logical camera number
Switches to previous
logical monitor number
Switches to next
logical camera number
Switches to next
logical monitor number
Preset selector
Camera Lock
Current Camera box
3
15