Filter
Top Products
56
Controlling other components connected
to the DVD Changer Receiver
The remote controller has two learning functions. One is
entering the signal number for a remote controller of
another brand that is pre-programmed. Another is a
normal learning function that enables the remote
controller to learn the codes from other remote
controllers.
Caution
• With some brand’s components, some buttons may not
work correctly. In this case, program the command
separately.
Learning a Pre-programming Code
1
2
3
4
123
456
789
0
DVD
RCVR / VCR
T V
CBL / SAT
MODE
-- / ---
MEM
5
By learning a pre-programming code, you can make the
RC-504M remote controller able to operate a product from
another brand. The buttons that are used for operation are
given on the next page.
Find the 3-digit number for the
brand name of the component that
you want to operate in the table on
the next page.
Turn on the component that you
want to operate (i.e., satellite tuner,
or television).
While holding down the MODE
button on the RC-504M that you
want to program, press the --/---
button, and then release both
buttons.
The SEND/LEARN indicator lights when
the MODE button is pressed and turns off
when the --/--- button is pressed. Wait until
the indicator turns off before releasing both
buttons. Then the SEND/LEARN indicator
lights again.
Within 30 seconds, enter the 3-digit
code number.
The SEND/LEARN indicator flashes
twice slowly. If the SEND/LEARN
indicator quickly flashes three times,
then either a mistaken 3-digit code was
entered or an incorrect operation was
performed. If this occurs, return to step 3.
Press the button that you
programmed and check if the
system operates correctly.
• If the component does not operate
properly, return to step 3 and repeat the
steps above.
• If it still does not operate properly, then
program the commands one by one to
the buttons on the RC-504M remote
controller.
VCR
BRAND SETTING No.
AIWA 302, 329, 333,
424, 440
AKAI 303, 304, 305,
306, 307, 357,
383
BAIRD 308
BELL & HOWELL 309
BLAUPUNKT 310
CGM 311, 312, 313
COLTINA 314
DAEWOO 315, 316, 394,
425, 439
DIGITAL 317
EMERSON 315, 318, 319,
320, 321, 322,
333, 356, 357,
429, 430, 432,
433, 434, 437,
439
FENNER 323
FISHER 309, 324, 325,
326, 327
FUJITSU 328
GENERAL
FUNAI 329
GE 330, 331, 352,
386, 396, 431
GO VIDEO 332, 336, 337,
438
GOLDSTAR 365
GOODMANS 335
GRUNDIG 338
HITACHI 329, 331, 339,
340, 341, 382,
383, 428
JVC 342, 343, 344,
345, 346, 347,
348, 349, 350,
383
LOEWE 351, 352
MAGNAVOX 329, 331, 352,
353, 354, 355,
380, 422
MITSUBISHI 343, 356, 357,
358, 359, 360,
361, 362, 363,
364, 396
NEC 309, 343, 365,
366, 367, 383
BRAND SETTING No.
NOKIA 313
NORDMENDE 368, 369, 370
OKANO 371, 372
ORION 319, 322, 373,
430, 437
PANASONIC 352, 374, 375,
376, 377, 378,
427, 435
PHILIPS 352, 353, 379,
380, 397
PHONOLA 311
PIONEER 343, 381
RCA 305, 330, 352,
382, 386, 396,
427, 431
REALISTIC 309, 326, 327,
329, 333, 352,
396, 397, 426
SABA 383
SAMSUNG 384,385, 386,
387, 388, 389,
390
SANYO 309, 327, 386,
391, 392, 393,
426
SCOTT 356, 394, 429,
430, 434
SELECO 395
SHARP 396, 397, 398,
399
SHINTOM 400
SIEMENS 401
SONY 329, 352, 402,
403, 404, 405,
406, 407, 408,
409, 410, 411,
412, 413, 423
SYMPHONIC 329, 414
TEKNIKA 329, 333, 352,
414, 415
TELEFUNKEN 416, 417
TOSHIBA 326, 356, 394,
418, 419, 420,
434
WATSON 421
WHITE 315, 333
WESTINGHOUSE
ZENITH 329, 402, 403,
422
Pre-programming Codes