Filter
Top Products
2525
Press DISTANCE.
The distance entry display for the front left
and right speakers appears.
Press 5/∞ to select the front left
and right speaker distance.
You can select a distance between 1 ft.
and 30 ft. (0.3 m and 9 m).
Note
• Press and hold the DISTANCE button to
switch between feet and meters. The initial
setting is feet.
Press DISTANCE, then press
5/∞ repeatedly to select the center
speaker distance.
You cannot enter the following distances:
• Distances longer than the distance set
for the front speakers.
• Distances shorter than the distance
obtained by subtracting “5 ft. (1.5 m)”
from the distance entered for the front
speakers.
Note
• If you selected a speaker configuration with
no center speaker on the previous page, this
step will be skipped.
1
2
Before starting the procedure below, measure the
distances from each speaker to the listening position.
For pair speakers such as front left and right speakers,
the distance from the listening position to one speaker
should be the same as the distance to the other.
In the procedure below, select the values which
approximate the actual distances.
Remote controller
only
3
4
5
Setting the Distance From the Listening Position to Each Speaker
DISTANCE
-- / ---
SEND / LEARN
TOP MENU MENU
RETURN
ON SCREEN
CH CH
VOLUME
UP
DOWN
TV / VCR
S
T
A
N
D
B
Y
/
O
N
E
N
T
E
R
LIGHT
DVD
RCVR / VCR
T V
CBL / SAT
INPUT
DIMMER
SLEEP
MASTER
VOLUME
PRESET
123
456
789
MEM CLR
0
R
E
P
E
A
T
A
-
B
R
A
N
D
O
M
M
U
T
I
N
G
ENTER
PLAYPLAY
SP A SP B
FM MODE
SURROUND
SP SETUP
IPM
ACOUSTIC
CONTROL
LATE
NIGHT
AUDIOANGLE
SUBTITLE
ZOOM
SW MODE
T.TONE CH SEL
DISTANCE
PRGV DISCSLOW STEP
RC-504M
MODE
–
+
DISTANCE
5/∞
DISTANCE
DISTANCE
DISTANCE
«
«
Press DISTANCE, then press
5/∞ repeatedly to select the
surround left and right speaker
distance.
You cannot enter the following distances:
• Distances longer than the distance set
for the front speakers.
• Distances shorter than the distance
obtained by subtracting “15 ft. (4.5 m)”
from the distance entered for the front
speakers.
Note
• If you selected a speaker configuration with
no surround speakers on the previous page,
this step will be skipped.
Press DISTANCE.
The normal display resumes.