Filter
Top Products
2121
ANTENNAANTENNA
Connecting an FM Outdoor Antenna
If the FM reception is not very clear with the supplied antenna, connect an FM outdoor antenna instead of the indoor FM antenna.
Notes
• Install the antenna well away from tall buildings and in an area where FM stations can directly be received.
• Keep the antenna away from noise sources (neon signs, busy roads, etc.).
• It is dangerous to put the antenna close to power lines. Keep it well away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock, grounding is necessary. Follow item 14 of the “Important Safeguards” on page 2
when you install the outdoor antenna.
Directional Iinkage
Do not use the same antenna for both FM and TV (or VCR) reception since the FM and TV (or VCR) signals can interfere with each
other. If you must use a common FM/TV (or VCR) antenna, use a directional linkage type splitter.
Directional linkage
type splitter
To DVD Changer
Receiver
To TV (or VCR)
FM outdoor antenna
Connecting 300 ohm ribbon
wire to a 75/300 ohm
antenna adapter (not
supplied)
Loosen the screws and
wrap the wire around these
screws. Then tighten the
screws with a screwdriver.
Tighten
Loosen
Connecting coaxial cable to a 75/300 ohm antenna adapter (not supplied)
3 Remove the transformer wire A
from slit B and insert it into
slit C.
4 Insert the end of the cable.
5 Clamp it in place with pliers.
6 Reinstall the cover.
4
5
1 Strip the end of the coaxial cable.
2 With your fingernail or a small
screwdriver, press the stoppers
outward and remove the cover.
Slit B
Slit C
Wire A
15 mm
3
mm
6
mm
6
mm
5
/8 in.
1
/8
in.
1
/4
in.
1
/4
in.