Filter
Top Products
MULTI CONTROL
46
C59 (180° 180)
C60 (225° 225)
C61 (270° 270)
C62 (315° 315)
12.5.8 C64 (WIA
Select from 5 functions.
Select the function to be displayed as main-function under WIND.
The optional analogue
selection.
Select from 5 functions. (WIA) is the factory setting.
If the selected main-fu n will
show the complimenting
function, (TWA) will be s
If the selected main-fun
show the corresponding angle, e.g. if (AWS) is selected, (AWA)
will be shown as the sub-function and vice versa for (TWS) and
(TWA).
(WIA): True (TWA) or a
Depending on what is s
(AWA): Will display app
independent of what is s
(TWA): Will display tr
independent of what is s
(AWS): Will display apparent wind speed (AWS) in this instrument
independent of what is set in C51.
The letters (AW) will be displayed to the right of the wind speed.
(TWS): Will display true wind speed (TWS) in this instrument
independent of what is set in C51.
The letters (TW) will be displayed to the right of the wind speed
value.
12.5.9 C65 DAMPING (SEA)
Damping of True wind Direction. Controls the response time of
wind changes. To change damping, press SET. To select damping
level, press PLUS and select from: d0 (min) to d9 (max). To store
the selected value, press SET.
Factory value is (d0), for use in calm sea. But if the sea is rough,
you may want to ”stabilise” the readout on the display, then select
d0 to d9.
Note! Damping is set separately for each instrument.
to the calibration certificate.
)
(WIA) is the factory setting.
wind instrument will display the same
nction is an angle, the sub-functio
angle, e.g. if (AWA) is selected as main-
hown as sub-function and vice versa.
ction is a wind speed, the sub-function will
pparent wind angle (AWA).
et in C51, (ON = True, OFF = Apparent).
arent wind angle (AWA) in this instrument
et in C51.
ue wind angle (TWA) in this instrument
et in C51.