Filter
Top Products
MULTI CONTROL
27
To stop alternating, pre
again.
8.2.6 SET and
Direction of current (SE d of current (DRF).
Alternating function. To
To restart alternating, p
8.2.7 (CMG) and (DM
Course made good (CM
The function is based o
The function keeps trac
displays course and distance in a straight line from the start
position.
Locate and mark yo
underway.
To find your new positi
sea chart.
The function starts at pow
To reset (CMG/DMG), press CLEAR.
When the MOB button is pressed it temporarily resets the
CMG/DMG function.
Alternating function. To stop alternating, press SET.
To restart alternating, press SET again.
8.2.8 WAYPOINT CLOSURE VELOCITY (WCV)
Displays the speed over ground towards the waypoint in (KTS),
(Km) or (Mh), (see 12.1.2, C11).
The text alternates between (WCV) and the selected (unit).
8.2.9 CROSS TRACK ERROR (XTE)
Distance in nautical miles (NM) to desired track.
To display this function, you must navigate towards a waypoint.
Your boat is the ”triangle” symbol and the desired track line is
represented by the ”3 vertical lines”. The ”triangle” symbol will tell
you on which side of the desired track you are. You should aim to
ss SET. To restart alternating, press SET
DRIFT
) and spee
T
stop alternating, press SET.
ress SET again.
G)
G) and distance made good (DMG)
n the principle of dead reckoning.
k of the boats way through the water and
ur position and reset CMG/DMG. Get
on, plot the course and distance on your
er on.