Filter
Top Products
MULTI CONTROL
7.4 Set and turn on shallow (SHA) and depth
alarm (D
Select shallow (SHA) or
The first digit in the prev
If you want to reset the
To select desired dep as
required.
Press SET to lock the s
By this last press on SE the selected alarm
function, which is indica
depth digit in the sub-fu
7.5 Set and turn o c
Select anchor alarm (AN
The first digit flashes.
The instrument will sug
(actual depth minus 1,5
To store the value press
The minute sign ( ´ ) is s
sub-function.
The instrument will sug
(actual depth plus 1,5 m
To store the value press
The minute sign ( ´ ) is shown above the last depth digit in the
sub-function.
7.6 Clear an alarm value
Select the alarm function to be cleared, press SET.
The first digit flashes.
To clear the alarm, press CLEAR. All digits are set to zero (0).
Press SET to lock the function.
7.7 Silencing an alarm
To silence a triggered alarm that sounds and flashes, press ANY
button.
The sound is silenced and the flashing stops.
The alarm is only triggered again if the selected depth value is
exceeded (shallower or deeper) by 2 m (6 feet).
7.8 Turning off / on an alarm
Select the alarm function to be turned off / on.
To turn the alarm off / on, press CLEAR.
The minute sign ( ´ ) disappears / appears.
EA)
depth (DEA) alarm, pres T. s SE
ious value flashes.
previous value to zero (0), Press CLEAR.
th s
pres MINUS, PLUS and PAGE
elected value.
T, you have turned on
ted by the minute sign ( ´ ) above the last
nction.
n an hor alarm (ANC)
C), press SET.
gest a value for the shallow (SHA) alarm
m / 5 FT).
SET, or select your own depth as in 7.3.
hown above the last depth digit in the
gest a value for the depth (DEA) alarm
/ 5 FT).
SET, or select your own depth as in 7.3.
25