Filter
Top Products
MULTI CONTROL
7 PLUS function
General information
Alarm on = minute sign
the sub-function.
Alarm off = no minute si
The alarms will be trigge
actual depth becomes le
alarm), or more (depth a
the set depth value.
The alarm is audible (signal) and visual (main and sub-function
flashes).
When a triggered alarm
again if the selected dep
If a different page tha
triggered, the set alar
flashing, until you silence or turn off the alarm. The instrument will
then automatically retur
Loss of signal. If there are no
display indicates 3 dotte
7.1 DEPTH mai
Depth from the water su
setting (See 12.2.3, C22).
Unit available in meters (m), feet (FT) or fathoms (FA).
(See 12.2.2, C21).
7.2 PLUS sub-functions
7.2.1 LIGHT CONTROL
The instrument uses red back lighting for the display and the 5
push-buttons. The lighting can be set at 4 different levels.
To change light level, press SET, The flashing text (Lit OFF) will
be displayed and the display will be lit momentarily.
To select between the 4 light levels, Press PLUS: LOW, MID,
MAX and OFF. To lock the selected level press SET.
The selected light level will be copied to all NX2 instruments
connected to the system. When the lighting is on, it is not possible
to reduce or turn off the lighting on an individual instrument.
s
( ´ ) displayed above the last depth digit in
gn ( ´ ) displayed.
red, if the
ss (shallow
larm), than
has been silenced, it will only be triggered
th value differs by +/-2m (6 ft)
n DEPTH is shown when the alarm is
m function will automatically be shown
n to the previous page.
depth echoes for 3 seconds, the
d lines ( --- ) until a new echo is received.
n-function
rface or the keel depending on calibration
22