Filter
Top Products
MULTI CONTROL
30
in (Pilot OFF) function
1.9.)
8.3.3 Steer reference (BTW)
This function requires the NX2 or NMEA compass transducer and
a NX2 GPS or NMEA navigator.
When selected, the function displays (BTW) and the analogue
steer pilot instrument displays the difference between the
compass heading and the bearing to waypoint (BTW).
The function can only be displayed if the connected navigator is
navigating towards a waypoint.
Since the displayed value it is controlled by the navigator, the
value can not be altered.
Select sub-function (Pilot), press SET.
The text (OFF) or the last selected steer reference function
flashes.
To select steer reference (BTW), press PLUS.
To activate the function, press SET. WP is shown on the display.
The sub-function (STR) automatically displays the stored (BTW)
value.
. (Available from Server software version