Filter
Top Products
MULTI CONTROL
12 Calibration
To get the most out of y
carefully calibrate the N
in a non volatile memory
To access calibration mo
seconds.
To select a calibration code, AGE as
required.
To return to normal mode, pr turn (RET)
is displayed.
The different calibratio
C10 - calibration of SPE
C20 - calibration of DEP
C30 - calibration of NAV
C50 - calibration of WIND
C70 - calibration of Netw
To change a calibration
To select calibration va PAG
required.
To lock the selected value, press SET
12.1 Calibration
12.1.1 C10 Retu
To return to normal mod
12.1.2 C11 (Unit KTS)
Unit for speed. Knots (KTS), km/h (K/h) or miles/h (m/h).
12.1.3 C12 (1.25 CAL)
Calibration value for speed and distance (1.00 - 1.99).
Drive the boat a measured distance at normal speed.
Compare the distance with the trip counter.
Calculate the value with the following formula:
True distance from the sea chart : T
Log trip counter distance: L
The current calibration value: C
New calibration value. N
If you suspect a current in the water,
drive the boat in both directions and
divide trip counter distance by 2.
our Nexus Network, it is important to
etwork. The calibration values are stored
.
de, press and hold SET more than 2
press MINUS, PLUS and P
ess SET when the text re
n routines are divided into five groups:
ED
TH
GATE
I
ork and NMEA settings
value, press SET.
US and
lue, press MINUS, PL E as
of speed C10
rn (RET)
e, press SET.
40