Filter
Top Products
MULTI CONTROL
8.3.4 Steer ref
This function requires ass
transducer , NX2 GPS o
When selected the fu
steer pilot instrument displays the difference between the
compass heading and t
and drift.
The function can only be dis if is
navigating towards a wa
Since the displayed va
value can not be altered
The function is comp
parameters compass heading, boat speed through the water,
course and speed ov
waypoint (BTW).
Select sub-function (Pilo
The text (OFF) or th n
flashes.
To select steer referenc
To store the function, pr
The sub-function (STR)
displays the stored (CTS
The text (CTS) and (ST
The function is invalua
distance to a waypoint.
8.3.5 Steer ref
This function requires th ansducer.
The function is semi automatic, i.e. when activated, present wind
angle is copied to memory. You can also change the value
manually.
The function displays the deviation from a set wind angle value
and can be used as a ”close hauled” tack indicator, or show an
enlarged ”picture” of the running angle.
Select sub-function (Pilot), press SET.
The text (OFF) or the last selected steer reference function
flashes.
To select steer reference (AWA), press PLUS.
To store the function, press SET. WIND is shown on the display.
The sub-function (STR) automatically displays the stored (AWA)
value.
The text (AWA) and (STR) is alternating.
If you want to change the steer reference value, press SET.
The first digit flashes.
erence (CTS)
log transducer, NX2 or NMEA comp
r NMEA navigator.
nction displays (CTS) and the analogue
he bearing to waypoint (CTS) including set
played the connected navigator
ypoint.
lue it is controlled by the navigator, the
.
ensated for set and drift, by using the
er ground (COG/SOG) and bearing to
t), press SET.
last selected steer reference functio
e
e (CTS), press PLUS.
ess SET. MEM WP is lit on the display.
automatically
) value.
R) is alternating.
ble when you want to sail the shortest
erence (AWA)
e NX2 or NMEA wind tr
31