Filter
Top Products
MULTI CONTROL
26
8 NAVIGATION f
8.1 NAVIGATIO
Heading 000° to 359°.
Heading true (HT) or heading e if
the compass transducer is c
If a navigator is conn
selected instead of com (See 12.6.10, C94).
Note! This page can either be on or off. As a factory setting this page
is automatically on
In the set up, you c
See chapter: 12.3.2
8.2 NAVIGATIO
8.2.1 STEER R
Displays the selected s
controls what is show
instrument (Art No 221 e selected
from 5 alternatives. (See 8.3)
8.2.2 STEER VA
Displays steer value for
8.3 and 9.3).
8.2.3 (SOG) an
Speed over ground (SOG) and course over ground (COG).
Alternating function. To stop alternating, press SET. To restart
alternating, press SET again.
8.2.4 (BTW) and (DTW)
Bearing to waypoint (BTW) and distance to waypoint (DTW):For
function explanation, see drawing inside cover page.
To display this function, you must navigate towards a waypoint.
Alternating function. To stop alternating, press SET. To restart
alternating, press SET again.
8.2.5 LATITUDE and LONGITUDE (POS)
Displays position in selected format. Select format from
degrees/minutes and 100:th of a minute (indicated by decimal ( . )
and minute ( ´ ) signs) or from format degrees/minutes/seconds
(indicated by minute ( ´ ) sign only). (See 12.3.9, C38).
Alternating function.
unctions
N main-function
magn tic (HM) can be displayed
nnecte (See 12.3.11 C40)
o d.
ected, course over ground (CG) can be
pass heading.
if a Compass transducer or GPS is connected.
an select this page to be on, off or automatic on.
N sub-functions
EFERENCE (Pilot OFF)
teer reference function. This function also
n on the optional analogue steer pilot
15-02). Steer reference can b
LUE (STR)
the selected steer reference function(See
d (COG)