Filter
Top Products
ENGLISH
35
BASIC
CONNECTIONS
BASIC OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
SETUP
: Up / Down : Enter : Select Exit : Exit
: Off
: 0dB
: Off
Surround Setup
Channel Level
PL x Music Parameter
CS Parameter
NEO: 6 Parameter
HT-EQ.
LFE Level
M-DAX
Return
Channel Level
Surround Mode
Center
Surround Right
Surround Back Right
Surround Back Left
Surround Left
Subwoofer
Return
: Up / Down : Change Enter : Exit : Exit
: Auto
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
PL x Music Parameter
ParameterCenter
Panorama
Dimension
Center Width
Return
: Up / Down : Change Enter : Exit : Exit
: Default
: Off
: 0
: 3
CS Parameter
TrubassCenter
SRS Dialog
Return
: Up / Down : Change Enter : Exit : Exit
: 0
: 0
NEO: 6 Parameter
Center Gain
Return
: Up / Down : Change Enter : Exit : Exit
: 0.3
3 SURROUND SETUP
This menu is for setting surround effect parameters
for the various surround input signals so as to bring
out the live audio effect of your speaker system.
•
Channel level:
“3-1 CHANNEL LEVEL”
(see page 35)
•
PL
II
x Music Parameter:
“3-2 PLIIx MUSIC PARAMETER”
(see page 36)
•
CS
II
Parameter:
“3-3 CSII
PARAMETER”
(see page 36)
•
NEO:6 Parameter:
“3-4 NEO:6 PARAMETER”
(see page 36)
1.
Select “Surround Setup” from the Main Menu
with the 3
or
4 cursor buttons and press the
ENTER button.
2.
Select the desired menu with the 3
or
4 cursor
buttons and press the ENTER button.
: Up / Down : Enter : Select Exit : Exit
: Off
: 0dB
: Off
Surround Setup
Channel Level
PL x Music Parameter
CS Parameter
NEO: 6 Parameter
HT-EQ.
LFE Level
M-DAX
Return
HT-EQ.:
Select to active the HT-EQ with the 1 or 2 cursor
buttons.
The total balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is because
fi lm soundtracks were designed to be played back
in large movie theater environments.
Activating the HT-EQ feature when watching a fi lm
made for movie theaters corrects this and restores
the correct tonal balance.
The HT-EQ feature is available except in the
following modes.
• 7.1 CH INPUT
• PURE DIRECT
• SOURCE DIRECT
• Dolby Head Phone
• When VIRTUAL is set for the surround mode
LFE Level:
Select the output level of the LFE signal included in
the Dolby Digital signal or the DTS signal.
Select “0dB”, “–10 dB” or “OFF” with the 1 or 2
cursor button.
☞
P. 36
☞
P. 35
☞
P. 36
☞
P. 36
3-1 CHANNEL LEVEL
1.
Select “Surround Setup” from Main Menu with
3
or
4 cursor buttons and press the ENTER
button.
2.
Select “Channel Level” with the 3
or
4 cursor
buttons and press the ENTER button.
3.
Set the Surround Mode with the 1
or
2 cursor
buttons.
Channel Level
Surround Mode
Center
Surround Right
Surround Back Right
Surround Back Left
Surround Left
Subwoofer
Return
: Up / Down : Change Enter : Exit : Exit
: Auto
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
: 0.0dB
4.
Select the desired menu item with the 3
or
4
cursor buttons, set the desired level with the
1
or
2 cursor buttons, and press the ENTER
button.
Surround Mode:
The surround mode can be independently set for
3 modes.
1. Multi Ch STEREO
2. CSII
3. Others
CHANNEL LEVEL
Center:
Set the effect level of the center speaker between
–12 and +12 level in 0.5 level interval .
• If “None” was selected for the center speaker
setting in the Speaker Size, then this setting will not
appear.
Surround Left or Right:
Set the effect level of the Surround speaker
between –12 and +12 level in 0.5 level interval .
• If “None” was selected for the surround speakers
setting in the Speaker Size, then this setting will not
appear.
Surround Back Left or Right:
Set the effect level of the Surround Back speaker
between –12 and +12 level in 0.5 level interval .
• If “None” was selected for the surround back
speakers setting in the Speaker Size, then this setting
will not appear.
M-DAX:
Select the desired M-DAX mode.
Select “High”, “Low” or “Off” with the 1 or 2 cursor
button. (See page 44)
After you complete this portion of the setup, move the
cursor to “Return” with the 3, 4 cursor buttons and
press the ENTER button.