Filter
Top Products
73
ENGLISH
BASIC
CONNECTIONS
BASIC OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
ADVANCED
OPERATION
3.
Press the AMP button and CD button. M1-02 is
displayed on the LCD.
Press the AMP.
↓
Press the CD.
4.
Press the CD button and “3” button. M1-03 is
displayed on the LCD.
Press the CD.
↓
Press the “3”.
5.
Press the CD button and 2 button.
↓
6.
When you are finished programming the
macro, press the ENTER button until the
MACRO indicator is disappeared and returns
to normal mode.
Now, execute the macro you just
programmed.
7.
Press the MACRO button and “1” button.
• The macro commands are transmitted to
the components in order, and the steps of
the operations are displayed on the LCD in
order.
Note:
When programing the amplifi er's input source in the
macro program, fi rst press the AMP button, and press
the source button.
(In the case of DVD input: AMP → CD)
Example 2
Turn this unit’s power on
↓
Turn the DVD player’s power on
↓
Change this unit’s input source to DVD
↓
Set the DVD player to play
3
.
3
.
3
.
1.
2
.
5
.
3
.
1.
5.
4
.
1.
Press and hold the MACRO and SET buttons
until the LEARN, MACRO indicators and
MACRO are displayed blinking on the LCD.
2.
Press the “2” button. M2-01 is displayed on the
LCD.
3.
To set the various steps of the macro, press the
following buttons in order:
(1) AMP → POWER ON.
↓
(2) DVD → POWER ON.
↓
(3) AMP → DVD.
↓
(4) DVD → PLAY.
↓
4.
When you are finished programming the
macro, press the ENTER button until MACRO
indicator is disappeared on the LCD and
returns to normal mode.
Now, execute the macro you just
programmed.
5.
Press the MACRO button and “2” button.
• The macro commands are transmitted to
the components in order, and the steps of
the operations are displayed on the LCD in
order.