Filter
Top Products
55
ENGLISH
BASIC
CONNECTIONS
BASIC OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
ADVANCED
OPERATION
SEARCH MODE
You can search for the channel you want to listen to
using one of three search modes. You can also enter
the number directly to select the desired channel.
ALL CHANNEL SEARCH MODE
1. 2.3.
2
.
3
.
1
.
(Using the unit)
1.
Turn the INPUT SELECTOR knob to select
“TUNER”.
2.
Press the BAND button to select XM band.
3.
Press the 3 or 4 cursor button on the front
panel to select the desired channel.
(Using the remote controller)
1.
To select tuner, press the TUNE button twice
within two seconds on the remote controller.
2.
Press the BAND button to select XM band.
3.
Press and hold the 3 TUNE or 4 TUNE
button.
PRESET SEARCH MODE
1. 2.3.
1
.
2
.
3
.
(Using the unit)
1.
Turn the INPUT SELECTOR knob to select
“TUNER”.
2.
Press the BAND button to select XM band.
3.
Press the 1 or 2 cursor button on the front
panel to select the desired preset channel.
(Using the remote controller)
1.
To select tuner, press the TUNE button twice
within two seconds on the remote controller.
2.
Press the BAND button to select XM band.
3.
1 or 2 button to tune in the desired preset
channel.
Or enter the preset channel number with the
numeric buttons.
CATEGORY SEARCH MODE
You can select the desired channel from the category
allocated to each channel.
Category being aired can be only selected.
1
.
1. 2.4.3.6. 5.
2
.
4
.
5.
3
.
(Using the unit)
1.
Turn the INPUT SELECTOR knob to select
“TUNER”.
2.
Press the BAND button to select XM band.
3.
Press the ENTER button on the front panel.
4.
Press the 1 or 2 button on the front panel to
select the desired category.
5.
After selecting the category, Press the 3 or 4
cursor button to select the desired channel of
the category.
6.
You can return to the normal mode by press the
ENTER button during Category Search Mode.
(Using the remote controller)
1.
To select tuner, press the TUNE button twice
within two seconds on the remote controller.
2.
Press the BAND button to select XM band.
3.
Press the CAT + or CAT - button.
4.
After selecting the category, Press the 3 or
4 button to select the desired channel of the
category.
5.
You can return to the normal mode by press the
ENTER button during Category Search Mode.
Note:
Category search automatically ends 10 seconds after
the last operation.