Filter
Top Products
74
ENGLISH
BASIC
CONNECTIONS
BASIC OPERATION
ADVANCED
CONNECTIONS
SETUP
ADVANCED
OPERATION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTION
ADVANCED
OPERATION
CLEARING MACRO PROGRAMS
The following procedure is used to erase macros
you have programmed into the remote controller’s
memory.
3
.
2
.
2
.
1
.
1.
Press and hold the MACRO and MENU button
until the LEARN, MACRO indicators and
MACRO are displayed blinking on the LCD.
2.
Press and hold the CL button, then press the
button for the numeric button to be cleared for
3 seconds. (in this case “2”)
• M2-CL will be displayed blinking on the
LCD.
3.
Press the ENTER button to clear and return
step 1.
• To cancel the memory clearing operation,
do not press ENTER button and simply
touch any other button.
4.
To return the normal mode, press and hold
down the ENTER button until MACRO indicator
is disappeared on the LCD and returns to
normal mode.
ADJUSTING THE INTERVAL TIME OF MACRO
OPERATIONS TRANSMITTING
1
.
1
.
4
.
3.
1.
Press and hold the MACRO and SETUP button
until the SETUP is displayed on the LCD.
• SETUP is displayed for 3 seconds.
2.
Confi rm the display changes from SETUP to
MCRxx. (“xx” means the interval time of macro
operations transmitting)
3.
Press the cursor button (1 or 2) to change the
interval time.
• The interval time can be changed from 0.5
to 5 seconds by 0.5 seconds step.
4.
Press and hold down the ENTER button until
MACRO indicator is disappeared on the LCD
and returns to normal mode.