Kenwood NV-301 Stereo System User Manual


 
62
Application section
For timer recording
1 Select the input source.
Select the recorded input source.
2 Select the broadcast station (only when TUNER
is selected above).
Select the preset station number
+“Press “ENTER” to save” is scrolled in the display
8
Complete the setup and save the
settings.
9
Put the unit in standby mode.
Set the clock before setting the timer.
Timer operation
7
Make the desired reservation.
1 “TUNER“ ........ Radio
2 “VIDEO 1” (NV-701 only)
3 “VIDEO 2” (NV-701 only)
For timer playback or AI timer playback
1 Select the mode.
Select “Timer Play” or “AI Play”.
2 Select the input source.
Select the source to be played.
3 Select the broadcast station (only when
“TUNER” is selected above).
Select the preset station No.
1 “Timer Play” Timer play
2 “AI Play” ..
Timer play with
gradually increas-
ing volume
1 “TUNER” ...Radio
2 “CD”
3 “TAPE”
4 “VIDEO 1” (NV-701 only)
“MD/DVD” (NV-301 only)
5 “VIDEO 2” (NV-701 only)
STANDBY
ON/STANDBY
STANDBY
POWER
MULTI CONTROL
SET
MULTI CONTROL
SET
MULTI CONTROL
SET
MULTI CONTROL
SET
ENTER
MULTI CONTROL
SET
01 87.50MHz
01 87.50MHz
Press "ENTER
(For U.S.A.)
÷ When this unit is put in the standby mode, the STANDBY
indicator lights green to indicate that a timer operation
has been set.
LightsLights