Filter
Top Products
Application section
49
Convenient CD recording
Recording preparations are required.
›
(Steps 1 to 4)
Recording digital sound tracks
(DIGITAL SOURCE RECORDING) (NV-701 only)
When a multichannel digital source is input from
an externally connected component such as a DVD,
the sound track can be recorded as a stereo mix.
When effects are applied to the sound, the
effect applied to the sound can be re-
corded.
R
+“Digital Rec Mode” is scrolled in the display
To end recording in the middle
÷ The cassette deck stops.
+“Press “ENTER” to save” is scrolled in the
display.
PGM
1
Select the input. .
2
Select “Recording Options” .
3
Select “Digital Rec Mode”.
4
Select the recording mode.
5
Save the setting.
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“CD Direct Recording”
“CD Program Recording”
“Timer Recording”
“Digital Rec Mode” (NV-701 only)
Lights
+“Recording Options” is scrolled in the display
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“CD Program Play”
“Recording Options”
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Setup” (NV-701 only)
ENTER
MENU
DEMO
SET
MULTI CONTROL
SET
MULTI CONTROL
Press "ENTER
Digital REC
Recording Op
SET
MULTI CONTROL
÷ When “A–Rec Mode” automatic recording is
selected, the tape player starts recording when an
audio signal is detected.
÷ When “M–Rec Mode” manual recording is selected,
the tape player starts recording when the ÷ (record)
key is pressed.
The following items can be selected by pressing the
MULTI CONTROL keys repeatedly.
“A–Rec Mode”
“M–Rec Mode”
(NV-701 only) Pressing the VIDEO/6ch IN key re-
peatedly switches the input between the compo-
nents connected to the VIDEO 1 and VIDEO 2 jacks.
VIDEO/6ch IN