Filter
Top Products
25
Basic section
Muting the sound temporarily
(Remote control unit only)
When CD has been selected.
÷ Press again to resume the original volume.
÷ The sound muting is also canceled when the volume
is controlled.
Let's have sound
Blinks
÷ Each press switches Exbass Mode on and off
alternately.
÷ The Exbass Mode is switched off at factory settings.
Lights
Reproducing sound with enhanced bass
(Exbass)
(Remote control unit only) (NV-301 only)
Standby mode
While the STANDBY indicator of the unit is lit, a small
amount of current is flowing into the unit to back up
its internal memory. (The TIMER indicator also lights
if a timer program has been activated before enter-
ing the STANDBY mode.)
This condition is referred to as the standby mode of
the unit. While the unit is in the standby mode, it can
be turned ON from the remote control unit.
This unit has been designed to minimize power con-
sumption.
One-touch operation function
The power can also be turned ON by pressing the CD,
TUNER, or TAPE key.
It is also possible to turn the power ON by simply
pressing the OPEN/CLOSE (0) key.
÷ When the CD or TAPE input is selected and a disc
has been loaded in the disc tray or a tape has been
loaded in the deck for use in playback, playback starts
automatically.
MUTE
EX.BASS
BASS
Selecting 6-channel audio input (NV-701 only)
VIDEO/6ch IN
When you want to select 6-channel audio input after hav-
ing made 6-channel connections, press and hold VIDEO/
6ch IN to select “6ch Input” instead of the “Video2” in-
put. To select another input source from VIDEO2 (digital
or 2-channel analog), press and hold again until “Video2”
appears in the display.
CD01
• • •
1:19
Muti
n
g
• O
N
• ••
6ch
• I
n
pu
t
• ••
SW
RSLS
RCL