Kenwood NV-301 Stereo System User Manual


 
29
Basic section
The following items can be selected by pressing
the MULTI CONTROL keys repeatedly.
“One Way” : Playback stops after having
played one side of tape. “
lights in the display.
“Reverse” : Playback stops after having
played both sides of tape in a
deck. “
” lights in the dis-
play.
“Endless” : Continuous playback of both
sides of tape. “
” lights in
the display.
To select the reverse mode
Let's have sound
To wind tape at high speed
÷ Press the 7 (stop) key to stop fast winding.
To fast wind in
direction \
To fast wind in
direction |
To stop playback
÷ Do not take out the cassette tape until the tape
transport has stopped completely.
You can select the manner in which the cas-
sette tape is played back or recorded on.
1 Select “Tape Options”.
2 Select “Reverse Mode”.
3 Select the reverse mode.
“Tape Options”
“Audio Options”
“Clock Options”
“Surround Options” (NV-
701 only)
“Reverse Mode”
“Dolby–NR”
MENU
DEMO
SET
MULTI CONTROL
MULTI CONTROL
SET
MULTI CONTROL
MULTI CONTROL
4 Save the setting and exit the mode.
ENTER
SET
SET
To skip to a song or selection on a tape (DPSS)
To skip selections
in direction \
To skip selections
in direction |
MULTI CONTROL
Press the MULTI CONTROL (4 or ¢) during
playback. Pressing the keys repeatedly adjusts
the number of songs or selections to be skipped.
DPSS FF 02
DPSS REW 01
When a tape is fast forwarded two songs
When a tape is rewound to the beginning of
the current selection
÷ There must be a gap of silence lasting at least 4
seconds long between selections.
÷ This function may not work properly with tapes that
have gaps of silence lasting less than four seconds or
selections containing numerous silent passages.
÷ The search stops at the end of the tape even if the
number of selections to be skipped has not yet been
reached.