Filter
Top Products
34
Basic section
1. Load a cassette tape.
2. Select the tape transport direction.
Let's record
Recording onto a tape
1 Open the cassette holder.
2 Insert a tape top end first with the
side you want to record on the top.
3 Close the holder.
1 Select the TAPE input by press-
ing the TAPE key.
2 Press the TAPE key so that the
desired direction indicator ap-
pears.
•
3 Stop playback by pressing the
7 (stop) key.
To reverse the transport direction
÷ When recording is started, the
tape is transported in the direction
selected in this step.
÷ Wind the tape to the position
where recording is to be started.
3. Set the recording condition.
Select the reverse mode. ª
Note that this cassette deck cannot record onto
Metal tapes.
Note
Note
÷ Differentiation between normal (TYPE )
and high (TYPE ) tape is set automatically.
÷ Remove tape slack before loading.
22
44
3
3
1
1
5
5
TAPE
22
DEMO
33
MENU