Filter
Top Products
31
KRF-V7771D (En/T)
Operations
Adjust the “Tone”.
Adjust the “SP Level”.
3
1
2
3 Select the Loudness On or Off.
This can be switched between and On = Off.
4 Set the midnight mode.
This setting is possible only with the Dolby Digital (AC-3)
input source.
Q
This can be switched in order of 1 = 2 = Off.
÷ When adjusting the Tone, go to step 2.
÷ When adjusting the speaker level, go to step 3.
Open the “Sound” menu.
1 Select the “Main Menu” icon.
2 Select the “Snd” icon.
The sound quality and the volumes of the speakers can be adjusted as required.
Use the procedure on this page to adjust the audio individually, on a per-source or per-program (movie) basis.
The effects of the loudness and tone setups are applied only to the sounds output from the “L” and “R” front speakers.
The loudness or tone control effect is maximized when “Lstn Mode” is set to “Stereo”.
Therefore, when the front speakers are set to “Nml” (Normal), low-frequency components are output from the subwoofer so
the loudness and tone effects are minimized.
÷ Select the “SP Level” icon in step 1.
÷ To return to step 1 from step 2, select the
icon.
÷ The speaker volumes adjusted here is only temporary.
These settings are returned to the setups made in the “Setup”
chapter when the power is switched off or another input is
selected.
÷ The speakers which have not been set up in the “SP Selection”
or “SP Selection (Custom)” menu screen under the “Setup
Surround” menu are displayed as “- - -” in the “SP Level” menu
screen.
Adjust the level of each speaker.
÷ Select the “Tone” icon in step 1.
1 Set “Tone” to “On” or “Off”.
2 Adjust “Treble”.
3 Adjust “Bass”.
: Midnight mode
C : Center speaker
RS : Right Surround speaker
LS : Left Surround speaker
SW : Subwoofer
Adjusting the audio
Easy audio adjustment
SP Level
SW
C
-6dB
+4dB
RS
+4dB
LS
+4dB
The audio adjustment described below cannot be set out when in the 6ch input mode.
SoundLsn Fnc Stp
SP Level
Tone
Loudness
Off
Off
Lstn Mode
Snd Fnc Stp
Tuner
CD1
Video2
Video3 Video4
Video1
TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2
Input
Digital
Input
Analog
AV AUX
Macro
Remote
Mode
Main
Menu
1
2
3
4
Tone
Bass
-8
+8
Tone
On
Treble
1
2
3