Filter
Top Products
30
KRF-V7771D (En/T)
Operations
Adjusting the audio
2
3
Set the “Input Level”.
Open the “Setup” menu and select “Input” icon.
Setup of Input Level
If the CLIP INDICATOR on the front panel
lights, change the “Input Level” setup.
1 Select the “Main Menu” icon.
2 Select the “Stp” icon.
÷ The input level from the input selected in step 1 can be selected
from “0 dB”, “–3 dB” and “–6 dB”.
Each selection operation of the “Input Level” icon switches it.
If the CLIP INDICATOR lights up, set the level of the selected input
to “–3 dB” or “–6 dB”.
÷ This setting is possible only for analog input.
1
Select the icon of the input for which you want to set the input level.
÷ When adjusting “CD1”, “Video2”, “Video3”, “Video4”, select
the “Input Analog” icon from the segment screen for analog
input, and then go to step 2.
3 Select the “Input” icon.
Setu
p
In
p
ut
Analog In
p
ut Level
-6dB
MD/Ta
p
e1
CLIP INDICATOR
When in the 6ch input mode, adjust the input level with
the source component.
Lstn Mode
Snd Fnc Stp
Tuner
CD1
Video2
Video3 Video4
Video1
TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2
Input
Digital
Input
Analog
AV AUX
Macro
Remote
Mode
Main
Menu
SndLsn
Fnc
Setup
IR
Download
Surround Input
Back Li
g
ht
Macro
1
2
3
Tuner
CD1
Video2
Video3 Video4
Video1
TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2
Input
Digital
Input
Analog
AV AUX
Macro
Remote
Mode
Main
Menu