Filter
Top Products
20
KRF-V7771D (En/T)
Setup
Write down the brand name and model number of your component in the space provided before
your call.
1
Call our Free-Phone Consumer Help-Line and explain which components you would like to add to
your remote control.
2
Open the “Setup” menu and select the “Download” icon.
3
Type Brand Model No. Remote Model No.
TV KENWOOD KV-???? RC-????
1
2
UK (including N. Ireland) : 0800-898520
1 Select the “Main Menu” icon.
2 Select the “Stp” icon.
3 Select the “Download” icon.
Select the “Download” icon.
4
Receive the setup codes through the telephone.
5
÷ “Loading” is displayed during readout of the remote control
codes.
÷ The backlight is turned off during “Loading”.
÷ To cancel downloading in the middle, select the CONFIRM key for
more than 2 seconds. As “Canceled” appears, select the
icon to exit the operation.
If your connected components are not listed in the Setup Codes chart, its’ setup codes can be downloaded through a telephone
line.
Place the receiver speaker of the telephone set on the coil
section of the remote control (as shown in the illustration on the
left).
÷ The operator supplys each setup code number. Should you ever
need to change your input configuration, this number can be used.
Please record for your future reference.
÷ After reception, the “Loading” message changes to the “Done”
message, which is shown for a few seconds.
Setup for controlling AV components
Setup of components which are not listed in the Setup Codes chart
(Futureset)
Type Brand Model No. Remote Model No.
3
4
5
÷ This number is designed specifically for “Futureset Upgrade”,
questions about system operation should be first addressed to
your place of purchase.
÷ The hours for customer service are:
Monday-Friday 9:00 am - 7:00 pm
Saturday 9:00 am - 3:00 pm
÷ After our customer service representative records the brand name
and model number of your component, he/she will ask you to hold the
remote to the speaker portion of your telephone as shown below.
Your remote control is KENWOOD model number: RC-R0807
Complete steps 3 and 4 before holding the remote to the
speaker portion of your telephone.
Futureset U
pg
rade
Download
Loadin
g
Lstn Mode
Snd Fnc Stp
Tuner
CD1
Video2
Video3 Video4
Video1
TV1
Phono
TV2
CD2
MD/
Tape1
CD2/
Tape2
Input
Digital
Input
Analog
AV AUX
Macro
Remote
Mode
Main
Menu
SndLsn
Fnc
Setup
IR
Download
Surround Input
Back Li
g
ht
Macro
1
2
3
This service will be available until 31 March 2001.